Water treatment plant operators remove cyanobacteria and the toxins they produce from source waters but calculating the amount of treatment needed for effective removal is difficult, particularly in bloom conditions when cyanobacterial cell numbers and toxins change quickly. Current cell counting and toxin measurement can take hours or days to complete, and the results are not available quickly enough to help treatment plant operators respond to changing conditions. There is a need for a real-time method that gives instant results. This research examined the utility of fluorometers; probes that emit light that is ‘reflected’ back at different wavelengths by living cells and other matter in the water and is detected by the fluorometer. It was found that when only one species of cyanobacteria was present, there was a good correlation between the fluorescent signal and cell number, particularly when source waters were clear and not cloudy. Cell numbers did not relate well to levels of toxins or taste and odour compounds. When fluorometers were installed in 13 water treatment plants the correlation between cyanobacteria cell numbers and fluorometer signals was validated, and this led to the conclusion that fluorometers can give early warning of blue-green algae blooms.

Components of dissolved organic matter (DOM) and dissolved organic nitrogen (DON) in source waters can react with disinfecting chlorine or chloramine to form nitrogenous disinfection byproducts (n-DBPs) which might be toxic and hazardous to health. In this research, water samples were collected from nine water treatment plants and found to contain 28 n-DBPs. Total n-DBP formation, and particularly brominated n-DBP formation, was affected more by the levels of bromine in raw water than the different forms of nitrogen, and this led to the recommendation that it could be beneficial to monitor raw waters with high bromine concentrations. Although chloramination caused formation of more n-DBPs than chlorination, coagulation treatment decreased total DBP levels. Further research was recommended to characterise the toxicity of n-DBPs and to optimise the removal of DOM, DON and other n-DBP precursors by using GAC Acticarb in the treatment train.

The aim of this project was to examine the utility of ultra-violet (UV) spectroscopy as a real-time water quality monitoring system. Two case studies were conducted. One assessed stormwater and showed that the UV system could detect that the first flush contained chemicals used as surrogates for water quality whereas later flows contained bacterial and biological markers. From this it was concluded that the sources of bacteria and chemicals were probably physically separated until they were mixed during surface runoff. In the second case study, the UV measurement equipment was set up in a groundwater filtration plant. It proved possible to accurately characterise water quality changes and assist operational decision-making.